Here you will find the waterproof junction boxes to protect the terminals of our security cameras. You will also find general purpose camera housings and brackets for mounting CCTV cameras on the wall, ceiling, pole and corner.
Useful to protect the connectors of our IP or AHD cameras
Useful for mounting our IP or AHD dome cameras
Various accessories for the installation of CCTV cameras
Useful to protect all connectors of your CCTV system
All our cameras, both IP and AHD, are equipped with a 40 cm cable with terminals. It is better to protect the connectors, in order to avoid oxidation. If you mount the camera near a junction box, you can protect the terminal there, otherwise you should order these waterproof junction bases which are specifically designed for our fixed cameras.
JUNCTION BASE FOR ..BCC2.. ..DCC2.. CAMERAS
This junction base is suitable for our smaller IP and AHD cameras, with fixed lens. These cameras are easy to recognize because the product code contains .. BCC2 .. or ..DCC2 .. which indicates the type of casing. We use these cameras in our plug & play kits, both POE and WiFi. This junction box is IP66 waterproof, to protect the connectors from the rain, and is suitable to contain the connectors of the camera and possibly also a small power adapter, if you remove the plastic shell. On the lid of the junction box there are the holes to screw the base of the camera. Cable access is possible from the back of the box, for in-wall pipes, or on the side, for external pipes.
This camera box is made of painted aluminum and is not effected by rust. Some neoprene gaskets on the lid and on the base of the box prevent the penetration of dust, humidity and insects. There is also an internal safety cable to prevent the cover from falling during installation.
JUNCTION BASE FOR ..-BCC5.. ..BCC6.. ..DCC5..
This junction box is suitable for our bigger IP and AHD cameras, with varifocal or zoom lens. These cameras are easy to recognize because the product code contains ..BCC5.., ..BCC6.., e ..DCC5.. which indicates the type of casing. This junction box is IP66 waterproof, to protect the connectors from the rain, and is suitable to contain the connectors of the camera and possibly also a power adapter. On the lid of the junction box there are the holes to screw the base of the camera. Cable access is possible from the back of the box, for in-wall pipes, or on the side, for external pipes.
This camera box is made of painted aluminum and is not effected by rust. Some neoprene gaskets on the lid and on the base of the box prevent the penetration of dust, humidity and insects. There is also an internal safety cable to prevent the cover from falling during installation.
POLE MOUNTING BASE FOR RE-BOX1/RE-BOX2 JUNCTION BOX
This collar is used for pole mounting of junction boxes. It is suitable for the RE-BOX1 and RE-BOX2 boxes. The collar is made up of a painted aluminum base and 3 steel clamps for poles with a maximum diameter of 13 cm. For mounting on larger poles, you can replace the supplied cable ties with longer ones. The accessory is not intended for poles with a diameter of less than 5 cm.
Here you will find all mounting brackets for our dome cameras, fixed and motorized.
WALL MOUNTING BRACKETS FOR DOME CAMERAS ..DCC5...
This wall bracket is suitable for our IP cameras RK-DCC5... and AHD cameras RE-DCC5.... You can use this bracket to mount the dome camera on the wall, creating a classic lantern style. This bracket is made of die-casted aluminum, so it is not effected by rust. It is hollow inside to allow the passage of cables and to eventually accommodate the terminals. Although being designed for our ..DCC5 .. dome cameras, with a little adjustment of the holes, you can also use this bracket for other dome cameras which do not have this dedicated accessory, such as our microspeed dome cameras.
CEILING MOUNT BRACKET FOR R..-SD... SD-D... SPEED DOME CAMERAS
This ceiling bracket is suitable for our speed dome cameras, both IP and AHD. This is not suitable to our smaller PTZ cameras, like minispeed dome or microspeed dome. You can use this bracket, instead of the standard one, if you want to hang the camera to the ceiling. This bracket is made of die-casted aluminum, so it is not effected by rust. It is hollow inside to allow the passage of cables.
CEILING MOUNT BRACKET FOR R..-SDM... SD-DM... MINI SPEED DOME CAMERAS
This ceiling bracket is suitable for our mini speed dome cameras, both IP and AHD. This is not suitable to our bigger speed dome cameras. You can use this bracket, instead of the standard one, if you want to hang the camera to the ceiling. This bracket is made of die-casted aluminum, so it is not effected by rust. It is hollow inside to allow the passage of cables.
POLE MOUNTING COLLAR FOR R..-SD... SD-D... SPEED DOME CAMERAS
This pole mounting base is suitable for our speed dome cameras, both IP and AHD. You can use this collar to mount the dome camera on a round pole. Although being designed for our speed dome cameras, with a little adjustment of the holes, you can also use this bracket for other motorized or fixed cameras which do not have this dedicated accessory. This collar consists of a metal mounting base with 3 steel adjustable clamps suitable for poles with a maximum diameter of 15 cm. For mounting on larger poles, you can replace the standard clamps with longer ones. This accessory is designed to be usedused together with the standard wall bracket included with the cameras.
CORNER MOUNTING BRACKET FOR R..-SD... SD-D... RH-SD... SPEED DOME CAMERAS
This corner mounting base is suitable for our speed dome cameras, both IP and AHD. You can use this bracket to mount the dome camera on a corner. Although being designed for our speed dome cameras, with a little adjustment of the holes, you can also use this bracket for other motorized or fixed cameras which do not have this dedicated accessory. This accessory is designed to be usedused together with the standard wall bracket included with the cameras.
CEILING MOUNT BRACKET FOR RH-SD... SPEED DOME CAMERAS
This ceiling bracket is suitable for our RH PRO Series speed dome cameras. You can use this bracket, instead of the standard one, if you want to hang the camera to the ceiling. This bracket is made of die-casted aluminum, so it is not effected by rust. It is hollow inside to allow the passage of cables.
POLE MOUNTING COLLAR FOR RH-SD.. SPEED DOME CAMERAS
This pole mounting base is suitable for our RH PRO Series speed dome cameras. You can use this collar to mount the camera on a round pole. This collar is suitable for poles with a maximum diameter of 15 cm. This accessory is designed to be usedused together with the standard wall bracket included with the cameras.
Here you will find general purpose brackets and housing, easy to adapt to all security cameras
WATERPROOF HOUSING FOR BOX CAMERAS WITH BRACKETS
This waterproof casing for CCTV is suitable for all box type cameras to be installed outdoor. You can also use it to contain and protect any other types of video and photo cameras. This casing is made of aluminum and is waterproof IP65. It is air-conditioned, because, in addition to the track for the camera, it also contains a 12VDC heater and fan which automatically switches on when necessary, based on the internal temperature of the container. The lid is hinged and tilting, for easy access to the components inside.
To install the housing, you can purchase the RE-ST2 wall bracket or the RE-ST2S ceiling bracket separately. These robust aluminum brackets can also be purchased without the casing, to install other devices.
MINI DOME HOUSING FOR INDOOR WITH BRACKET
This mini dome housing for indoor is suitable for all mini cameras, both IP and AHD. It is very small, so it is ideal in many indoor environments where a larger camera would be out of place. The housing is made of plastic and is suitable for indoor installation only. It can also contain our wifi mini-cameras, because the plastic cover does not shield the antenna. This housing is equipped with an external transparent globe and a black inner cover which serves to make the inside of the case not visible from the outside. This makes it difficult to guess the shooting direction of the camera.
You can mount this casing directly on the ceiling or on the wall. If you prefer the "lantern" style, you can buy the RE-ST6 wall bracket separately.
DOME HOUSING FOR INDOOR
This mini dome housing for indoor is suitable for all mini cameras, both IP and AHD. It is bigger then the mini dome RE-C5S, so it is also suitbale for other devices, bigger than mini cameras. The housing is made of plastic and is suitable for indoor installation only. It can also contain our wifi mini-cameras, because the plastic cover does not shield the antenna. This housing is equipped with an external transparent globe and a black inner cover which serves to make the inside of the case not visible from the outside. This makes it difficult to guess the shooting direction of the camera. This casing support wall or ceiling direct mounting.
VANDAL-PROOF DOME HOUSING FOR OUTDOOR WITH BRACKET
This dome housing for outdoor is suitable for all mini cameras, both IP and AHD. It is water-proof IP66 and vandal-proof IK10. This housing is made of strong die-casted aluminum and polycarbonate. It is equipped with an external transparent globe and a black inner cover which serves to make the inside of the case not visible from the outside. This makes it difficult to guess the shooting direction of the camera.
You can mount this casing directly on the ceiling or on the wall. If you prefer the "lantern" style, you can buy the RE-ST6B vandal-proof wall bracket separately.
WALL BRACKET FOR BOX CAMERAS
This wall mounting bracket is suitable for all classic box type cameras. It is made of painted aluminum. It is equipped with swivel joint and is 16 cm long, with a maximum load of 3Kg.
WALL/CEILING BRACKET FOR BOX CAMERAS
This wall/ceiling mounting bracket is suitable for all classic box type cameras. It is made of painted aluminum. It is equipped with swivel joint and provides 22 cm space from the surface and 18 cm. heigth. Maximum load is 5Kg.
These waterproof boxes, with waterproof cable glands, are useful for containing and protecting cable junctions of your video surveillance system.
WATERPROOF BOX FOR RJ45 JUNCTION
When wiring IP cameras outdoors you will be often forced to connect two network cables together. This waterproof box is equipped with two RJ45 sockets (female-female) to which you can connect the incoming and outgoing RJ45 cables. This box includes two IP66 waterproof cable glands for cable entry and exit. The grommets have an M22 threaded body with lock nut and gasket, so you can also mount this junction box to a surface.
Once you have connected the RJ45 and tightened the cable glands, you can leave the box outdoors or in a manhole, without fear that moisture can penetrate inside.
WATERPROOF BOX FOR ELECTRICAL JUNCTIONS
This watertight box is very useful to protect any electrical junction of your CCTV system. The box comes with two IP66 waterproof cable glands for the entry and exit of cables (max. 9 mm. diam.). Inside there is a 3-place terminal block for connecting the wires. The lid of this box is equipped with a gasket and two holes for fixing to the wall.
Once the cable glands have been tightened and the lid closed, you can leave the box outdoors or in a manhole, without fear that moisture can penetrate inside.
