WiFi Access Points
WIFI HOTSPOTS FOR YOUR NETWORK TO BRING YOUR WIFI WHERE YOU NEED IT
..for wifi IP cameras
COVER YOUR PROPERTY WITH STABLE WIFI, INDOOR AND OUTDOOR, SUPPORTING MESH
WIFI HOTSPOTS FOR YOUR NETWORK TO BRING YOUR WIFI WHERE YOU NEED IT
COVER YOUR PROPERTY WITH STABLE WIFI, INDOOR AND OUTDOOR, SUPPORTING MESH
WIFI AP 2.4 GHz FOR INDOOR/OUTDOOR
Indoor/Outdoor WiFi hotspot. 2.4GHz 300Mbps. POE or mains power. Ideal for WiFi cameras
INFOWIFI AP 2.4/5 GHz FOR INDOOR/OUTDOOR
Indoor/Outdoor WiFi hotspot. 2.4/5GHz 300/1200Mbps. POE or mains power. Ideal for all wifi devices
INFOWIFI6 AP FOR INDOOR
Indoor WiFi6 hotspot. 2.4/5GHz 3000Mbps. POE or mains power. Ideal for all wifi devices with many connections. Supporting MESH
INFOWith these APs, connected via cable, you can create new WiFi hotspots and perfectly cover even large areas. Just connect the AP to your network with a network cable, and you'll have a new WiFi where you need it.
WiFi AP 2.4GHz for indoor/outdoor
This WiFi Access Point creates a 2.4GHz (300 Mbps) WiFi network, the frequency used by most WiFi cameras, making it ideal for video surveillance systems. It is waterproof and can be installed both indoors and outdoors, on a wall or on a pole, using the included metal straps. If you connect this AP to a PoE switch, it will be powered through the network cable. If instead you connect it to non-PoE ports, such as those on a router, you will need to use the included PoE injector. Two 5dBi omnidirectional antennas ensure excellent range and great obstacle penetration. The AP is automatically configured using just your smartphone.
WiFi AP 2.4/5GHz for indoor/outdoor
This WiFi Access Point creates a WiFi network at 2.4GHz (300 Mbps) and 5GHz (1200 Mbps). It is ideal as a network AP because it allows you to connect both 2.4GHz devices, such as WiFi cameras, and devices that can take advantage of the faster 5GHz network, such as smartphones or computers. It is waterproof and can be installed both indoors and outdoors, on a wall or on a pole, using the included metal straps. If you connect this AP to a PoE switch, it will be powered through the network cable. If instead you connect it to non-PoE ports, such as those on a router, you will need to use the included PoE injector. Two 5dBi omnidirectional antennas ensure excellent range and great obstacle penetration. The AP is automatically configured using just your smartphone.
WiFi6 AP for indoor (ceiling/wall) with MESH
This WiFi Access Point creates a WiFi6 2.4GHz (574 Mbps) and 5GHz (2400 Mbps) network. It is ideal as an indoor network AP because it uses the latest WiFi6 standard, offering higher speeds, wider coverage and the ability to handle numerous simultaneous connections. It is installed indoors, on a wall or ceiling, and provides a next-generation WiFi connection that is still compatible with all devices. If you connect this AP to a POE switch, it will be powered through the network cable. If you connect it to non-POE ports, such as those on a router, you will need to use the included POE injector. Four internal 3dBi antennas ensure excellent range and great obstacle penetration. The AP is configured automatically via smartphone. This AP supports the Easymesh feature, which allows you to install multiple APs of this type, wirelessly connected to each other, and effectively cover even large properties without connection interruptions when moving from one AP to another. See below a small mesh network.
The first WiFi Access Point in your network is built into the router. Place the new AP in an area not covered by the router, where you can run a network cable. Position it high up and free from obstacles.
As many as you like. You can place one in each area in order to cover the whole property.
The AP is self-configuring. You can fine-tune the settings with your smartphone, and the configuration interface is accessible through a web browser.
All of our WiFi AP support both modes. In Router mode, the AP creates its own WiFi network with a different IP address range from the router. In Bridge mode, the AP creates a network using the same IP address range as the router.
Our WiFi6 APs support the Easymesh feature, which allows you to install multiple APs connected wirelessly to cover a large property. One of the APs acts as a controller and is connected to the network via a wired port. The other APs are configured as satellites (mesh agents) and only require power, as they connect to the controller via WiFi. Even though it is made up of multiple APs, the mesh network has a single name (SSID), and you can move from one AP to another without ever losing connection.
You can find product prices on our e-commerce portal CCTVSTOREPRO.COM
CCTVSTOREPRO.COM
